Led Indicators - Axis Q60 Serie Installationsanleitung

Specifications

LED Indicators

Status LED
Unlit
Green
Amber
Amber/Red
Red
Buttons
Control Button
For location of the control button, see Hardware Overview on page 9.
The control button is used for:
• Resetting the product to factory default settings. See page 20.
• Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS
Service. For more information about these services, see the User Manual.
Power button
Press and hold the power button to temporarily power the product when the dome cover is
removed. The power button is also used with the control button to reset the camera to factory
default settings. See page 20.
Connectors
Network connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
NO NO TICE NO TICE TICE
Use the supplied midspan.
Indication
Connection and normal operation.
Shows steady green for 10 seconds for normal operation after
startup completed.
Steady during startup. Flashes during firmware upgrade or reset
to factory default.
Flashes amber/red if network connection is unavailable or lost.
Firmware upgrade failure.
23
AXIS Q60 Series