First Use; Inserting Slides - Silvercrest SND 3600 B1 Bedienungsanleitung

SilverCrest SND 3600 B1

First use

Inserting slides

 Insert the mounted slides into the fixture on the rapid slide feeder as shown in
the following image. Make sure that the slides are not inserted the wrong
way around or upside down.
 Insert the rapid slide feeder with the scan section facing forwards into the
negative/slide slot (3).
 Inserting slides into the digitizer:
1. Use the slider to adjust the thickness of your slides. If the slider is set
correctly, it will prevent two slides from being inserted into the digitizer at
the same time.
34 - English