Leica T Anleitung Seite 201

Entering the required data
Fig. 90a-c
Pressing the button takes you to the corresponding
IP Settings
submenu. If required, you can enter a fi xed IP address and subnet
mask for the camera by pressing the
However, these two settings are normally supplied automatically by
the WLAN. Enter the corresponding password in the
fi eld to access the relevant network. If no password is set for the
network, you can leave this fi eld blank.
Managing networks
Fig. 91a-c
The settings for diff erent networks can be deleted using the
option in the WiFi menu. This is
MANAGE NETWORKS
recommended for WLAN networks that you use infrequently or only
once.
Connected networks are indicated by a symbol ( ).
► Select
► Select in the submenu
► Select
MANAGE NETWORKS
button here.
MANUAL
Password Fig. 90a
Fig. 91a
Fig. 90b
Fig. 90c
Fig. 91b
Fig. 91c
EN
197