Acoustic Signals; Monitor / Viewfinder Settings - Leica T Anleitung

EN

Acoustic signals

On the Leica T you can set whether you want particular operations
or a full memory card to be indicated by tones, or whether you
prefer operation of the camera and photography itself to be largely
quiet.
► Select
► Select the required settings in the
submenus (
AF Confirmation
Monitor / viewfi nder settings
For optimum visibility and to adapt to diff erent lighting conditions,
the brightness and color reproduction can be adjusted.
Notes:
• The operations described below using the example of the
monitor settings also apply to the viewfi nder settings, i.e. for the
EVF BRIGHTNESS
• If the Leica Visofl ex external electronic viewfi nder available as an
accessory is not attached, these menu options cannot be
selected and the relevant function icons are grayed out.
• The viewfi nder is turned on automatically - and the camera
monitor is turned off - as soon as the sensor in the eyepiece
detects that you are looking through the viewfi nder. However, if
menu control is active, this does not happen until you tap the
shutter release.
• Further details of viewfi nder can be found on p. 205.
148
, ,
Volume Click
, , )
OFF LOW HIGH
and
EVF COLOR ADJUSTMENT
Brightness settings
► Select
► Select
AUTO
by the external brightness)
or
► Make the required setting on the scale in the submenu using +
,
SD card full
Color settings
► Select
2.
options.
Fig. 42
► Using
horizontal with the right - to move the cursor from its initial
position in the center to the position that results in the desired
color reproduction in the monitor screen, i.e. towards the
corresponding colors displayed at the edges
• The color reproduction in the monitor screen changes
according to your setting.
in the submenu (for automatic setting controlled
Fig. 42
1.
2.
Cursor for current setting
2.
Color directions (Y = yellow, G = green,
2.
B = blue, M = magenta)
1.
3. 3.
Symbol for resetting to neutral-
position (center)
2.
or the adjusting dials - vertical with the left,