Parkside PLV 1500 A1 Originalbetriebsanleitung Seite 25

• Never operate the implement
without the attached collection
bag or impact protector. Dan-
ger of injury! Always keep well
away from the ejector opening.
• Do not operate the implement in
the vicinity of inlammable liq-
uids or gases as this could give
rise to the danger of a ire or
explosion.
• Always disconnect the plug from
the mains socket before working.
Work intervals:
• After the implement has been
turned off, the cutting cylinder
will continue to rotate for a few
seconds. Keep hands and feet
well away.
• Do not touch the spring tines be-
fore the implement has been dis-
connected from the mains and
the spring tines have come to a
complete standstill. Risk of injury
owing to a sharp implement!
• Only remove plant parts when the
implement is standing completely
still. Ensure that the grass ejec-
tor opening is clean and free.
• Switch off the power when the
implement is to be transported,
lifted or tilted and when travers-
ing other surfaces than grass.
• Children must never play with
the device.
• Always switch off the implement
and disconnect the power plug:-
- Whenever you leave the im-
plement
- Before you clean the ejector
opening or unblock or unclog
the implement
- When the implement is not
being used
- During all maintenance and
cleaning work
- When the power cable is dam-
aged or has become tangled
- When the implement hits an
obstruction during work or
when unusual vibrations arise.
Establish the cause and see if
the implement has been dam-
aged. Do not repair it yourself!
Have the implement repaired
by an authorised workshop!
• Store the implement in a dry
place well out of reach of
children.
CAUTION! The following
states how to avoid damage
to the implement and any re-
sulting harm to people:
Take care of your implement:
• Switch off the power when
the implement is to be carried
across steps.
• Inspect the implement each time
before it is to be used. Never
operate the implement if safety
devices (e.g. impact protector,
parts of the cutting facility or
bolts are missing, worn out or
damaged. Check especially the
power cable and starting lever
for damage. To avoid imbal-
ance, all tools and bolts must be
exchanged as complete sets.
• Only use spare parts and acces-
sories that have been supplied
or recommended by the manu-
facturer. The use of alien parts
results in the immediate loss of
all guarantee claims.
• Ensure that all nuts, bolts and
screws are irmly tightened and
GB IE
25