Parkside RAPIDFIRE 2.0 Originalbetriebsanleitung Seite 9

b) In the power tools, use only the
batteries designed for the pur-
pose. The use of other batteries may
result in injuries and risk of fire.
c) Keep the unused battery away
from paper clips, coins, keys,
nails, screws and other small
metal objects, which could cause
bridging of the contacts. A short
circuit between the battery contacts may
cause burns or fire.
d) If used incorrectly, liquid may
leak from the battery. Avoid
contact with this. In the event of
accidental contact, rinse off with
water. If the liquid gets into eyes,
seek medical assistance. Leaking
battery fluid may cause skin irritations or
burns.
6) SERVICE
Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
7) FURTHER SAFETY INSTRUCTIONS
a) Hold the device by the insulated
gripping surfaces when perfor-
ming work in which the cutting
tool may come into contact with
hidden wiring or its own cord.
Contact with a live wire can also cause
a charge in metal parts of the device
and result in an electric shock.
GB
8) SPECIAL SAFETY DIRECTIONS FOR
BATTERY-OPERATED TOOLS
a) To reduce the electric shock haz-
ard, unplug the battery charger
from the mains before cleaning
the charger.
b) Do not subject the cordless screw-
driver to strong sunlight over long
periods and do not leave it on a
heater. Heat damages the battery and
there is a risk of explosion.
c) Allow a hot cordless screwdriver
to cool before charging.
d) Do not open up the cordless
screwdriver and avoid mechani-
cal damage to the battery. Risk
of short circuit and fumes may be
emitted that irritate the respira-
tory tract. Ensure fresh air and seek
medical assistance in the event of dis-
comfort. After eye/skin contact, rinse the
affected areas with water or a neutraliser
and consult a doctor.
9) RESIDUAL RISKS
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this electric
tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear pro-
tection.
c) Damage to your health caused by swing-
ing your hands and arms when operating
the appliance for longer periods of time
or if the unit is not held or maintained
properly.
IE NI CY
9