Autoradio+cardreader MD 80947 ML.book Seite 9 Dienstag, 27. September 2005 8:26 08
While pushing the radio in, take care to ensure that the cables are free and
will not be damaged.
• Press the RESET button (10) using the tip of a pen or another pointed object.
• Insert the control panel as described below.
The ISO adapter plug
Use the car's ISO adapter plug for the car radio's ISO socket block to produce a
secure electrical connection.
Back up cable
Ensure that the yellowbackup cable for the station
memory is connected to the permanent plus.
After making all the connections, press the RESET button
(10).
Antenna relay cable
The blue cable is available for a relay controlled antenna. The relay extends the
antenna automatically when the radio is switched on. When it is switched off the
antenna is retracted.
This relay cable can also be used to control an external amplifier. Please refer to
the amplifier's operating instructions for the correct connections.
Never connect the blue cable to the engine cable; this could damage the
radio!
MD 80947
Installation
GB
GB-9