Autoradio+cardreader MD 80947 ML.book Seite 17 Dienstag, 27. September 2005 8:26 08
If the TA function is on during an automatic station search you can use the
TUN/TRK/SKIP+/- (22/23) button to save/find only stations that broadcast
traffic announcements.
You can interrupt the radio if it changes from CD/MP3 mode or from a
channel without traffic announcements to a channel with traffic
announcements. To do this press the TA button (12). The TA function is
now paused without the TA mode being switched off.
EON TA (Enhanced Other Network Information)
The extended other network information (EON) provides additional functions for
locating a station with traffic announcements. Specifically, the device also
switches to a station with traffic announcements if you are listening to a station
that does not provide travel announcements. After the announcement it
switches back to the previous station.
EON settings menu
• Press in and hold the MULTIJOG dial (3) while in radio mode. The EON setting
menu opens.
• Press in the multijog dial (3) again to call up further menus.
• Within a menu you can select settings by turning the MULTIJOG dial (3) one
position to the left or right.
The settings do not require confirmation and are saved as soon as the display
returns to radio or CD mode.
TA SEEK or TA ALARM
TA SEEK: If you leave the reception range or the signal for traffic
announcements becomes weaker the search process is started and
searches for the strongest TA station (station with traffic announcements).
TA ALARM: If you leave the reception area or the signal for traffic
announcements becomes weaker an alarm signal sounds.
PI SOUND or PI MUTE
PI SOUND: Station search with sound.
PI MUTE: The sound is muted when searching for stations.
RETUNE L or RETUNE S
RETUNE L (long): The search for a station with the correct PI (programme
identification) code lasts for 90 seconds.
RETUNE S (short): The search for a station with the correct PI code lasts for
30 seconds.
MD 80947
Radio functions
GB
GB-17