MD 80403 Autoradio BDA_ENG.FH11 Fri Jan 28 12:14:09 2005
REMOVING AND INSERTING THE CONTROL UNIT
ISO adapter plugs
Note!
Use the car radio's ISO adapter plug to produce a secure electrical connection.
Important!
Ensure that the pink backup cable is pointed towards the steady plus (for station memory).
After making all the connections, press the RESET button (10).
Antenna relay cable
The yellow cable is available for a relay-controlled antenna.
The relay will extend the antenna automatically when the unit is switched on and retract it again
when the unit is switched off.
Caution:
Do not connect the yellow cable to the engine cable because this may damage the unit.
Stereo-cinch output
You can connect external units (e.g. amplifiers) to these connections (red and white cinch
connections).
Seite 6
C
M
Y
CM
MY
CY CMY
K