Motion Menu - Eneo VKC-1378/IR-316 Handbuch

5.6.2 MOTION Menu

To enter MOTION menu, press button at MAIN > SPECIAL > MOTION > ON.
Up to 4 motion detection areas can be programmed in size, position, sensitivity and display on/off.
If MOTION in MAIN > SPECIAL menu is set to ON, „MOTION" is displayed on the monitor whenever the motion is
detected and the digital effect appears if MOTION VIEW is set to ON.
MOTION Factory Default Descriptions
AREA AREA1
SELECT
AREA ON
DISPLAY
HOR. MOVE 12
WIDTH 32
VER. MOVE 7
HEIGHT 24
SENSITIVITY 40
MOTION OFF
VIEW
Selects one of 4 areas, AREA~AREA4, to be adjusted.
If set to ON, the window selected by AREA SELECT appears and enables the
motion detection for that area and vice versa.
Moves the window selected by AREA SELECT leftward or rightward.
To see the moving, AREA DISPLAY should be ON.
button decreases and button increases WIDTH of the window selected by
AREA SELECT at rightmost
To see the change, AREA DISPLAY should be ON.
Moves the window selected by AREA SELECT upward or downward.
To see the moving, AREA DISPLAY should be ON.
button decreases and button increases HEIGHT of window selected by AREA
SELECT at bottommost
To see the change, AREA DISPLAY should be ON.
SENSITIVITY is adjustable between 0 and 40 for the window selected by AREA
SELECT.
MOTION VIEW setting is applied for all areas.
If set to ON, motion result is displayed as green coloured video.
If set to OFF, motion result is not displayed.
38