Rear Shock Absorber - Yamaha YZ250LC Fahrer- Und Wartungshandbuch

EC580000

REAR SHOCK ABSORBER

53 Nm (5.3 m•kg, 38 ft•lb)
Extent of removal:
Extent of removal
Preparation for
removal
1
2
REAR SHOCK ABSORBER
1 Rear shock absorber removal 2 Rear shock absorber disassembly
Order Part name
REAR SHOCK ABSORBER
REMOVAL
Hold the machine by placing the
suitable stand under the engine.
Seat
Silencer
1 Clamp (air cleaner joint)
2 Rear frame
3 Bolt (rear shock absorber-relay arm)
4 Bolt (rear shock absorber-frame)
5 Rear shock absorber
6 Locknut
7 Adjuster
8 Spring guide (lower)
9 Spring guide (upper)
10 Spring (rear shock absorber)
11 Bearing
56 Nm (5.6 m•kg, 40 ft•lb)
29 Nm (2.9 m•kg, 21 ft•lb)
Q'ty
w
Support the machine securely so there is no dan-
ger of it falling over.
Refer to "SEAT, FUEL TANK AND
SIDE COVERS" section.
Refer to "EXHAUST PIPE AND
SILENCER" section.
1 Loosen the screw (air cleaner joint).
1
1 Hold the swingarm.
1
1
1
1
1
1
1
2 Refer to "REMOVAL POINTS".
5-59
CHAS
32 Nm (3.2 m•kg, 23 ft•lb)
Remarks