General Description; Contents; Overview; Functional Description - Parkside PNTSA 20-Li A1 Originalbetriebsanleitung

General description

The illustration of the principal func-
tioning parts can be found on the
front and back foldout pages.

Contents

Unpack the appliance and check that it is
complete. The appliance is supplied with
the motor head itted (
motor head, open
( 8).
- Motor housing
- Waste container
- 3-part vacuum tube
- Suction hose
- Handgrip section
- Paper ilter bag
- Housekeeping nozzle
- Floor nozzle with
- turnable insert attachment
with brush and rubber lip, for vacu-
uming carpets and smooth surfaces
(already mounted)
- Crevice nozzle
- Wall bracket
- 2 cross-head screws
- Wet and dry vacuum cleaner
operating instructions
- Charger and rechargeable battery
operating instructions
Dispose of the packaging material properly.
1). To remove the
the securing clips

Overview

1 Motor housing
2 Carrying handle
3 On/off switch
4 Battery bay cover
5 Suction connection
6 Waste container
7 Hook for wall bracket
8 2 locking clips
9 Blower connection (not visible)
10 3-part vacuum tube
11 Handgrip section
12 Suction hose
13 Wall bracket
14 Fixing screws for wall bracket
15 Crevice nozzle
16 Housekeeping nozzle
17 Floor nozzle with
18 turnable insert attachment
with brush and rubber lip, for
vacuuming carpets and smooth
surfaces (already mounted)
19 Paper ilter bag
20 Rechargeable battery
21 Charger
22 Folded ilter closure
23 Folded ilter
24 Accessory holders

Functional description

The wet and dry vacuum cleaner is
equipped with a robust plastic container
for waste collection. The castors make the
appliance very easy to manoeuvre. The
suction low is switched off by a loat dur-
ing wet vacuuming once the waste tank is
full. The appliance is also equipped with a
blower function.
The following describes the function of the
operating parts.
GB IE
15