Specifying The Export Format; Performing Motion Searches - Geutebruck Pilot Bedienungsanleitung

Working with the Pilot
Image processing and data storage
Images typically serve for documentation of procedures and for analysis purposes.
They are stored to be analyzed later. Most stored pictures are irrelevant, however. In
most situations, only a few specific images or sequences are needed, which must be
filtered out from the mass of other stored pictures.
The search for picture materials can be performed in a number of different ways:
‰ Targeted: You have a rough idea of the time and date and use search function
‰ Automated: You use the motion search and search in specifically relevant
‰ Event-related: You use the advanced search to look for an event.
The Pilot will help you perform an event-based motion search in the database. You
Searching with the
can also use the regular video recorder functions to fast-forward to a specific time.
Pilot
For a targeted search over longer periods, you must use a viewer with GSCView as
only there is it possible to enter specific times and perform an extensive search.
If you have found the relevant portion in a recording, you can mark the start and end
Saving sequences
points of a sequence using the Pilot and then export the sequence to a USB storage
medium.

Specifying the export format

Before you export a video sequence, you should check in the settings whether the
appropriate export format is set.
1.
2.
3.
4.

Performing motion searches

If the exact time of the relevant images is not known or if the period is too large to be
searched with the video recorder functions, the motion search can help.
If, for instance, you search the recorded pictures of a parking lot, you can quickly
find the arrival time of a vehicle or identify persons in its surroundings.
The Pilot provides the functions necessary to complete a convenient motion search.
It can be particularly helpful when the sought recordings can be associated with an
event.
1.
2.
3.
36
to find the relevant picture materials in the database.
areas for movement.
Press Settings button on the Pilot/Center.
Go to the Desktop Settings tab.
Set the desired format there:
x
Single Picture for the export of individual images
x
GBF for exporting a video sequence in the Geutebrück format
x
MPEG2 for export in standard MPEG format
Exit the dialog and save the settings.
To perform a motion search, select the monitor with the relevant camera.
Navigate in the control bar to Menu 3
With manual motion search, you jump from one motion to the next. Click in the
control bar on backwards search, for instance. The search stops once a picture
with movement is found. You can see the time and date on the screen.
V 1.3