Figure 39: Menu 7 Character Set 2 And Classic - Geutebruck Pilot Bedienungsanleitung

Information about the device
Control bar Menu 7
Figure 38: Control bar Menu 7
The function keys in Menu 7 represent 8 virtual GeViSoft input contacts and can be
freely assigned actions in GeViSoft. The function keys F1 to F8 are permanently set
in GeViSoft to the address 9001 to 9008.
By using the offsets in setup register card <device settings> <function key offset>
those addresses can be adjusted to the central videomanagement of GeViSoft for
each Pilot (full particulars see chapter Managing I/O contacts on page 45).

Figure 39: Menu 7 Character Set 2 and Classic

56
V 1.3