Assembling The Table-Top Barbecue; Placing The Table-Top Barbecue On The Stand - Silvercrest STRG 2200 A1 Bedienungsanleitung Und Serviceinformationen

SilverCrest STGR 2200 A1
(14) in front of you, and position the frame on top of the 4 tubes.
6. Insert one of the screws (13) from the outside into one edge of the frame and secure with a wing nut
(12). Use a cross-head screwdriver to prevent the screw (13) from turning at the same time.
7. Repeat step 6 with the other 3 tubes.
8. Now tighten the lower 4 wing nuts (12) of the storage tray (14). Use a cross-head screwdriver to
prevent the screw (13) from turning at the same time.
Warning about property damage

Don't force the wing nuts (12) when tightening. Tighten them lightly. Otherwise, the stand
may be damaged.

8.2 Assembling the table-top barbecue

1. Place the grill plate (2) on the grill pan (7). Ensure that the grease outlet from the grill plate (2) is on
the back of the table-top barbecue, so that the fat can run through it into the grease collection
tray (3).

8.3 Placing the table-top barbecue on the stand

1. Place the stand on a flat, stable surface.
2. Disconnect the barbecue from the mains. To do this, disconnect the power cable plug (5) from the
mains socket.
3. Hold the table-top barbecue at the sides, using the handles below the grill pan (7).
4. Place the barbecue on the stand, ensuring that it sitting centrally on the stand and is balanced.
14 - English