Mesto Resistent Plus 3594 Gebrauchsanleitung Seite 14

GB IRL
Assembly
2. Screw the spray wand [5] onto the shut-off valve [6].
Checks
Visual inspection:
pressure gauge [11] and spray wand [5] undamaged?
No leaks: Pump up the empty device to 2 bar.
Function: Pull the red button on the safety valve [9].
Activate the shut-off valve [6].
Making preparations
Observe the instructions in the section entitled „Safety".
1. Pull up the red button on the safety valve [9] until all excess pressure is released from
the tank.
2. Press the pump handle [10] down and turn it counterclockwise.
4. Add the spraying liquid to the tank [4].
5. Screw the pump [1] onto the tank [4].
6. Press the pump handle [10] down and turn it clockwise.
7. Generate the required pressure
8. Press the pump handle [10] down and turn it counterclockwise.
Spraying
Observe the instructions in the section entitled „Safety".
Operate the device upright only.
Avoid allowing drops of spray to drift onto areas that are not being treated.
Observe the instructions of the spray product manufacturer!
AUS USA
Are the tank [4], pump [1], spray line [7] with shut-off valve [6],
14
NZ
in the tank [4]
CDN IND
.