LUCCI ALTITUDE ECO LED Installationsanleitung Seite 47

Finally secure the canopy cover to canopy screws via turn it clockwise. Fig. 6
4.
Insert the blades through the side slot of the motor and align with the 3 holes. If the holes do not align, the blade is
5.
upside down. The blade should fit securely and the screws should slot into the blade screw holes.
Insert the screw driver with screw through the key hole of lamp bracket. Secure the blades with 3 blade screws, and
ensure that the 3 blade screws are tightened at the same time. Ensure all screws are tightened evenly to reduce
chance of warping or unbalancing. Repeat this process for all blades. Fig.7
Lift up the LED light kit to the lamp base and connect the LED power wires to the LED light kit via the quick connectors.
6.
Then press the housing assembly screws into the big ends of keyhole slots, and turn the LED light kit body clockwise
until the housing assembly screws are firmly situated in the narrow ends of the keyhole slots. Fig.8
Fig.7
47
Fig.6