Waeco Magic Watch MWE-150-2DIS Montage- Und Bedienungsanleitung Seite 41

MWE-150-2DIS.book Seite 41 Mittwoch, 29. Juni 2005 5:20 17
magic watch
Good positions at the front are (see fig. 13, page 7):
– Above the rear view mirror
– On the dashboard
– On the ceiling
– On the window beside the wing mirror
Good positions to the rear are (see fig. 14, page 7):
– On the boot cover
– On the ceiling
– Next to the window
– On the C pillar
➤ Pull off the protective foil and stick the display in a suitable position.
Note
The extension cables are marked: L (left) and R (right).
This marking helps you connect them to the control electronics to
ensure that the display is correct. These markings can also be
found on the control electronics.
The polarity of the socket cannot be reversed: They can be only
be plugged into the connection in one way.
➤ Insert the display plug into the socket of the corresponding extension
cable (see fig. 16 A, page 8).
➤ Guide the extension cable to the control electronics and insert the socket
of the extension cable into the connection on the control electronics (see
fig. 16 B, page 8).
Installing MAGIC WATCH
41