Using The Fl Ash; Adjusting The Brightness (Exposure Compensation) - Olympus u1060 Grundlegende Bedienungsanleitung

Using the fl ash
The fl ash functions can be selected to best match
the shooting conditions and render the desired
image.
1
Press the # button.
2
Use 34 to select the setting option,
and press the  button to set.
Item
The fl ash fi res automatically in low-
FLASH AUTO
light or backlight conditions.
Pre-fl ashes are emitted to reduce the
REDEYE
occurrence of red-eye in your photos.
The fl ash fi res regardless of the
FILL IN
available light.
FLASH OFF The fl ash does not fi re.
P
AUTO
SET OK OK
FLASH AUTO
! $
AUTO #
Description
Adjusting the brightness
(Exposure compensation)
The exposure value automatically set by the
camera can be adjusted brighter or darker to obtain
a desired shot. This function is not available in the
h shooting mode.
1
Press the F button.
EXPOSURE COMP.
Exposure compensation value
2
Use 1234 to select the image
showing the desired brightness, and
then press the  button.
0.0 0.0 +0.3 +0.3
+0.7 +0.7 +1.0 +1.0
EN 13