Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Changing the timer duration
Use the
or
button to change the timer duration. After a few
@
A
seconds, the change is adopted.
Cancelling the timer duration
Use the
button to reset the timer duration to 0:00. The
A
change will be adopted after a few seconds. The timer is
switched off.
Checking the time settings
If several time-setting options are set, the corresponding
symbols are illuminated on the display. The timer counts down
in the foreground. The
S
and the timer can be seen counting down.
To check the
timer,
S
x
button repeatedly until the arrow points to the appropriate
0
symbol. The value is shown for a few seconds on the display.
Setting the cooking time
The cooking time for your meal can be set on the oven. When
the cooking time has elapsed, the oven switches itself off
automatically. This means that you do not have to interrupt
other work to switch off the oven. The cooking time cannot be
accidentally exceeded.
Example in the diagram: Cooking time 45 minutes.
Use the function selector to set the type of heating.
1.
The temperature selector is used to set the temperature or
2.
grill setting.
Press the
0
button twice.
3.
20:00 is shown in the display. The time symbols light up and
the arrow
is next to
N
x
Use the
@
or
A
button to set the cooking time.
4.
Press the
button.
n
5.
The oven starts. The cooking time counts down in the display
and the
symbol lights up. The other time symbols go out.
Nx
The cooking time has elapsed
An audible signal sounds. The oven stops heating. 0:00 is
shown in the display. Press the
stops. Turn the function selector to the off position. The oven is
switched off.
Changing the cooking time
Use the
or
button to change the cooking time. After a few
@
A
seconds, the change is adopted. If the timer has been set,
press the
button beforehand.
0
symbol is preceded by the
cooking time or
clock, press the
0
.
button. The audible signal
0
Cancelling the cooking time
Use the
button to reset the cooking time to 0:00. After a few
A
seconds, the change is adopted. The cooking time is
cancelled. If the timer has been set, press the
beforehand.
Checking the time settings
If several time-setting options are set, the corresponding
symbols are illuminated on the display. The
the symbol for time function which is currently visible on the
display.
To check the
arrow
N
button repeatedly until the
0
symbol. The display shows the value for a few seconds.
Setting the clock
When the appliance has been connected to the power supply,
or after a power cut, the
in the display. Set the clock.
Press the
1.
Default value
Default value
Use the
@
2.
Press the
3.
Changing the clock
Prerequisite: your appliance must be switched off.
Press the
1.
The time symbols light up in the display, the
to the
0
Use the
@
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
timer,
cooking time or
V
x
arrow points to the appropriate
N
symbols and three zeros light up
N0
or
button.
@
A
@
: 12:00
23:59
A
or
A
button to set the clock.
0
button. The time is set.
0
button twice.
symbol.
or
button to change the clock.
A
button
0
arrow is next to
N
clock, press the
0
arrow is next
N
37
Werbung
Kapitel
Inhaltsverzeichnis
