Use As Intended; Environmental Protection; Nozzles Packet - Kärcher FRV 30 ME Bedienungsanleitung

Symbols on the machine
Warning
Risk of injury due to rotation
arm. Never reach underneath
the appliance while the high-
pressure cleaner is running.
The rotation arm continues to
rotate for a while after the high-
pressure cleaner has been
switched off. Wait for the rota-
tion arm to stop before starting
any work on the appliance.
For operation with hot water:
Warning
Risk of burns!
Do not touch hot surfaces!
Before first use of the patio and
wall cleaner read these instruc-
tions and act in accordance
with them.

Use as intended

The floor cleaner, in combination with a
high pressure cleaner, is suitable for clean-
ing floors and walls.
Maximum water pressure 25 MPa (250
bar).
Maximum water temperature 85 .
The wastewater is drained off via a hose.

Environmental protection

The packaging material can be recy-
cled. Please do not place the packag-
ing into the ordinary refuse for disposal, but
arrange for the proper recycling.
Old appliances contain valuable ma-
terials that can be recycled. Please
arrange for the proper recycling of old
appliances. Please dispose your old appli-
ances using appropriate collection sys-
tems.
Notes about the ingredients (REACH)
You will find current information about the
ingredients at:
www.kaercher.com/REACH

Nozzles packet

Note
The required packets of nozzles have been
adjusted to suit the corresponding high
pressure cleaners and must therefore be
ordered separately.
Nozzle size of the high-
pressure cleaner:
034...035
036...040
041...045
046...050
051...080
Assemble nozzle packet
1 O ring
2 Rotation arm
3 Nozzle
4 Union joint
 Inser the O ring in the nut of the rotation
arm.
 Place the nozzle on it.
 Slightly fasten the nozzle with the Union
joint.
Note
The exit jet must be directed parallel to the
rotation arm.
– 2
EN
Nozzle pack-
et
2.642-430.0
2.642-431.0
2.642-432.0
2.642-433.0
2.642-982.0
9