Before Use; Charging The Product; Use - Powerfix Profi IAN 296661 Bedienungs- Und Sicherheitshinweise

Before use

Charging the product

Note: Remove all packaging materials from the product.
Note: You can recharge the product using a normal household socket
or using your car's 12 V connection.
Note: The fuse of the car charger adapter
The technical data of the fuse must comply with information given in
the section "Technical data". The fuse may only be replaced by a
qualified electrician.
CAUTION! Do not connect the product to your car's 12 V connection
if the car battery is already old and worn. Doing so could mean that
the car engine will no longer start.
Note: In order to use the product without a USB cable
to recharge the rechargeable battery before use. The charging process
takes about 4 to 5 hours. The rechargeable battery is firmly integrated
into the base of the product.
Note: Charge the product for approx. 12 hours prior to first use.
Connect the USB cable
adapter
10
Connect the micro-USB connector on the USB cable
micro-USB input socket
Plug the power adapter
adapter
11
Note: During charging, the charging indicator
charging is complete, the charging indicator
the charging indicator
the socket or the car charger adapter
Disconnect the adapter from the product to prevent the battery from
discharging.

Use

RISK OF ACCIDENT! Preferably do not use the product whilst
driving the vehicle. When using the product in a vehicle, be sure this does
not endanger the driver or the passengers. Always store and secure the
product so that even full braking does not pose a risk of injury from the
product or product damage.
You can secure the product by using the hook
base on a flat, ferromagnetic surface. Use the joint
3
the product up to 180 ° on the magnetic base.
CAUTION! Please note the position of your hands whilst turning
the magnetic holder to prevent pinching your fingers (see Fig. C).
10 GB
with the USB connector of the power
12
or the car charger adapter
on the product.
8
into a socket, or plug the car charger
10
into the 12 V socket in your vehicle.
is green, pull the power adapter
9
can be exchanged.
11
.
11
lights up red. When
9
lights up green. When
9
from the 12 V connection.
11
or the magnetic
5
, you need
12
to the
12
out of
10
to tilt
6