Blower Function; Accessories - Hoover MULTI FUNCTION PRO Bedienungsanleitung

1. When the product float valve activates and loses performance, please stop vacuuming
and empty the tank using the internal handle for easy emptying. [8]
2. Prolonged use after this time may cause damage.
3. Always empty, wash and dry the product after use.
notE: Ensure that the pre-motor filter is removed when vacuuming liquids.

Blower function

The cleaner can be used as a blower for leaves, dust, etc.:
1. Switch off cleaner.
2. Remove the hose and the bag, if fitted.
Remove the exhaust filter [7].
3.
4. Attach the hose to the blower connector [7].
5. Switch on cleaner.

ACCESSORIES

Please see the model specification on the packaging label for inclusion of accessories to
individual models. All accessories can be purchased separately from Hoover. (See Hoover
Spares and Consumable section).
All accessories can be fitted to the end of the hose or the end of the extension tube.
all included accessories, hose and tubes are integrated on the product [3].
Floor Combi nozzle (I) - There are three different interchangeable inserts you can select
according to the surface you need to clean [3]:
(Q3) rubber squeegee for liquid collection.
(Q2) bristles for hard floor.
(Q1) plastic for carpet.
To remove an insert, push both lateral clips on the top surface of the nozzle and pull. To
replace, see image [10].
Extra Long Crevice tool (T) - For corners and hard to reach areas.
Furniture nozzle (U) - For soft furniture, fabrics and ulphostery.
parquet Caresse nozzle* – For parquet floors and other delicate floors.
mini turbo nozzle* – Use the mini turbo nozzle on stairs or for deepcleaning on textile
surfaces and other hard to clean areas.
*Available as optional
Multifunction_Pro__3-8_union.indd 6
6
GB
23-04-2010 14:10:27