Hardware Installation; Software Installation - Velleman DVR4USB Bedienungsanleitung

5. Hardware Installation

1. Connect your PC with the network first and plug the
device into the USB port if you desire to monitor through
the IE browser.
2. Connect the yellow plug with the video signal from the
camera; connect the white plug to the audio signal from
the camera.
3. Turn on your computer and install the software.

6. Software Installation

After the hardware installation, please turn on your computer. You may be reminded that the computer has found
new hardware. This message can be ignored.
1. Run setup.exe. The installation procedure will initiate. 2. Click NEXT.
3. Select the desired video format and click NEXT.
5. Select the desired option and click NEXT.
7. Click FINISH to complete the installation.
The information in this manual is subject to change without prior notice.
DVR4USB
4. A window may pop up reminding users whether to
stop or to continue. Click CONTINUE ANYWAY.
6. Click NEXT.
8. After the installation procedure, please reboot your
computer. A shortcut will be created on the desktop.
4 VELLEMAN