Display Elements - SICK C2000 Bedienungsanleitung

Chapter 3
Note
2 5 4
8 008 684/RI57/2007-11-28 8008684/YJC8/2015-03-30
Product Description
plug of the receiver) has been pressed and released. The reset
button is connected locally to the extension plug of the receiver
using a pre-assembled cable from SICK. The reset button does not
need to be wired up at the switch cabinet (see Section 5.9).
The reset button must also be pressed when the device is switched
on.
The restart inhibit (RES) cannot be activated in a cascade. The safety
evaluation unit LE 20 can be used to provide this function in cascades.
Fig. 3-8: RES not possible in cascade
S = Sender
R = Receiver
3.3

Display elements

Fig. 3-9: Display elements of C 2000, M 2000 and M 2000-A/P
S = Sender
R = Receiver
= LED yellow
= 7-segment-display,
Multibeam Photoelectric Safety Switch M 2000
= Machine
= Reset button
= 7-segment-display,
receiver
= LED yellow
© SICK AG • Safety Systems • Germany • All rights reserved
Operating Instructions
Safety Light Curtain C 2000
= LED amber
= LED red
= LED green