Connections On The Back Of The Device; Sistore Mx 3204; Pin Assignment - Siemens SISTORE MX Installationshandbuch

6.2

Connections on the back of the device

6.2.1

SISTORE MX 3204

1 2
5 6 7
Siemens Building Technologies
Fire Safety & Security Products
3 4
8 9 10
Fig. 2 Back side of SISTORE MX 3204
1 Fan
2 Video output
3 ON / OFF
4 Video input
5 Power supply
6 LAN/USB
7 COM 1/COM 2
RS485
8 VGA
9 L-out
10 L-in
11 MIC
12 SCSI
13 Digital I/O input
14 Digital I/O output
15 Digital I/O control

Pin assignment

RS-485 socket
PIN 1: NC
PIN 2: A (TX+/RX+)
PIN 3: B (TX-/RX-)
PIN 4: NC
PIN 5: GND
Description of SISTORE MX / MX DVD
2 video outputs, 50 Hz/60 Hz
Connect the same type of unit here as that on the video inputs (PAL, for
example), since otherwise it is not possible to operate the video outputs.
Switching the unit on and off
16 video connection jacks
Depending on the model and licence file, up to 32 cameras can be
connected.
100 – 230 V AC, 50 – 60 Hz, 120 W (use only the power supply provided)
LAN: connection of a LAN cable (RJ45 network cable)
USB: Connection of 2 USB-enabled devices
(e.g. USB-ISDN modem, printer, mouse, keyboard, DVD burner)
Please note: The operation of external USB hard drives as a memory
expansion is not allowed for technical reasons.
Connection for control of pan/tilt cameras, CKA48xx control panel or MX
multichannel box
For connecting a monitor, e.g. CTMC 15/17/19
Connection of commercially available speakers or headphones
Connection of audio sources
Connection of a microphone for voice recording
(such as a standard microphone sold as a commercial PC accessory)
For connection of SCSI RAID system, e.g. SISTORE RAID
Connection: HD68
Standard: Ultra Wide SCSI, Single End Mode
Trigger inputs 1 ... 16
Digital outputs 1 ... 8
Digital inputs 1 ... 4
RS-485 socket
PIN 6: NC
PIN 7: NC
PIN 8: NC
PIN 9: NC
17
02.2009