Playing Records - auna 10032889 Bedienungsanleitung

EN
16

PLAYING RECORDS

1. Open the lid.
2. Connect the DC power cord to an electrical outlet.
3. Press the on/off button in the rear to power on the unit.
4. Place a record on the turntable platter and select the desired speed
(33/45) according to the record, at the same time, please make sure the
7" & 12" vinyl record selector match the vinyl record size.
5. Open the tone arm clip to release the tone arm. press the start button
in the front panel, the turntable will automatic move to the desired
position over the record and start playing the record from the first
songs. If you want to play the other songs of the record, then press
the Pick-up arm lift button (14), the tone arm will raised up and stop
playing, move the tonearm to your desired positon of the record by
hand, then press the Pick-up arm lift button (14) again, the tone arm will
down slowly and start to playing music again.
6. The tone arm will return to the arm rest automatically when the record
has reached the end.
7. For best performance and product maintenance, unplug the turntable
when not in use.
Note: When playing a 45 rpm record, use the included 45 rpm adapter
located in the holder near the tone arm. Please remove the plastic
cartridge protector before start to playing record.