Channel Search; System Setting; Parental Lock; Factory Default - Schwaiger DSR 5108 T Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für DSR 5108 T:

Inhaltsverzeichnis

USER INSTALLATION

This menu consists of the 4 major sub-

menus listed below:

-Channel Search

Channel Search

Move cursor to Channel Search item in User Installation menu by using VOL+ or VOL-

keys on the RCU, and press OK key to enter into the Channel Search menu.

1 ) C o u n t r y C o d e :

country code.

Use VOL+ or VOL- keys to

select directly. Or use CH+ or CH- key to

select one in the channel list popped by

pressing OK key, and then press OK key to

confirm.

2) Channel : Refer to the same operation

methods as the above.

3)Frequency: The original value is determined by the above selected channel.

Edit Mode: If you want to edit the value in Frequency item, please press the Edit

Mode key (Red color key) on the RCU. Use the numeric keys on the RCU to change

its value directly, or input the desired value in the keypad popped by pressing OK key.

4)FFT,Code Rate, Constellation, Guard interval: The values in these items are

changed automatically and can not be set by hand.

5) Search Channel : Allows you to search for channels using the following options:

- Search All Channel: Search All Channels in the network.

- Search 1 Channel : Search programs in one channel which need to be

- Search Network : Search programs for the network.

S e l e c t t h e d e s i r e d

selected from the channel column.

Channel Search

Inhaltsverzeichnis