Herunterladen Inhalt Inhalt Diese Seite drucken

Transport; Packaging And Storage - WIKA CPH7650 Betriebsanleitung

Tragbarer druckkalibrator
Vorschau ausblenden Andere Handbücher für CPH7650:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5. Transport, packaging and storage
5. Transport, packaging and storage

5.1 Transport

Check the instrument for any damage that may have been caused by transport.
EN
Obvious damage must be reported immediately.
CAUTION!
Damage through improper transport
With improper transport, a high level of damage to property can occur.
If the instrument is transported from a cold into a warm environment, the formation of
condensation may result in instrument malfunction. Before putting it back into operation,
wait for the instrument temperature and the room temperature to equalise.

5.2 Packaging and storage

Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change in
installation site, sending for repair).
Permissible conditions at the place of storage:
Storage temperature: -20 ... +60 °C (-4 ... +140 °F)
Humidity: 0 ... 85 % relative humidity (non-condensing)
Avoid exposure to the following factors:
Direct sunlight or proximity to hot objects
Mechanical vibration, mechanical shock (putting it down hard)
Soot, vapour, dust and corrosive gases
Hazardous environments, flammable atmospheres
Store the instrument in its original packaging in a location that fulfils the conditions
listed above. If the original packaging is not available, pack and store the instrument as
described below:
1. Fully charge the instrument, in order to avoid deep discharge of the rechargeable
battery.
2. Wrap the instrument in an antistatic plastic film.
3. Place the instrument, along with the shock-absorbent material, in the packaging.
4. If stored for a prolonged period of time (more than 30 days), place a bag containing a
desiccant inside the packaging.
28
When unloading packed goods upon delivery as well as during internal
transport, proceed carefully and observe the symbols on the packaging.
With internal transport, observe the instructions in chapter 5.2 "Packaging
and storage".
WIKA operating instructions, model CPH7650

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis