Miele 10 459 520 Montageanweisung Seite 24

en - Installing in a side-by-side combination
Installation
 The freezer or the refrigerator with a
freezer compartment must be in-
stalled to the left of the refrigerator
(when viewed from the front). The
foamed-in side wall heating located in
freezer or refrigerator with freezer
compartment is designed to prevent
the build-up of condensation
between the two appliances.
 Place the two appliances as close as
possible to their final position so that
they can be aligned for any uneven-
ness in the floor. The back of the ap-
pliances still need to be kept access-
ible to complete the installation.
 Before starting, peel off any protect-
ive foil from the appliance casing.
24
Notes on moving side-by-side appli-
ances:
 Push the combination alternately from
the left- and right-hand corners.
Whilst doing so grasp hold of the out-
side front corners. Do not use your
knees to push against the sides or
the appliance doors!
 Once the side-by-side combination is
right in front of the niche, push it
carefully into position.
 If you need to pull the combination
back out of the niche, hold it by the
lower third and pull it straight out.