Philips HR2860 Bedienungsanleitung Seite 14

EnglisH
1
cleaning
Cleaning the appliance is easiest immediately after use.
Never immerse the motor unit in water.
Do not touch the cutting edges of the blade units when you handle or
clean them. They are very sharp and you could easily cut your fingers
on them.
Never clean the motor unit, the accessories and the parts in the
dishwasher.
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
Note: Parts of the appliance may become discoloured when the appliance is
used to process ingredients that contain a lot of pigment such as cloves,
anise, cinnamon and tomato paste. This is normal.
1 Unplug the appliance and remove the blender, the dry mill or the
wet mill from the motor unit.
 Clean the blender, the dry mill or the wet mill in warm water with
some washing-up liquid and rinse them under the tap.
 If necessary, remove the rubber sealing ring from the blender lid
and rinse it with water.
 Clean the motor unit with a moist cloth.
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 15).