guarantee and service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you find its phone number in the
worldwide guarantee leaflet). If there is no Consumer Care Centre in
your country, go to your local Philips dealer.
troubleshooting
Problem
The appliance
does not
work
The blade
unit or motor
unit is
blocked.
The motor
unit gives off
an unpleasant
smell during
the first few
times of use.
Possible cause
The appliance is
equipped with a safety
lock. If the blender
beaker dry mill beaker
or wet mill beaker has
not been assembled
properly onto the
motor unit, the
appliance does not
work.
There is too much
food in the beaker.
This is normal.
EnglisH
Solution
Press the on/off button to
make sure that the appliance
is switched off. Then check
whether the beaker has been
assembled properly (see
chapter 'Using the appliance').
Switch off the appliance and
process a smaller quantity.
If the appliance continues to
give off this smell after you
have used it a few times,
check whether the processing
quantity and processing time
are correct.
15