Configuration Options - Balluff BTL7-A serie Betriebsanleitung

BTL7-A/C/E/G50_-M_ _ _ _ -T_2/3-NEX-S32/KA_ _
Micropulse Transducer - Rod Style
6
Configuration with the Micropulse Configuration Tool (continued)
6.3

Configuration options

Prerequisites
– USB communication box connected to the transducer
and PC.
– Software correctly installed.
– Transducer connected to the power supply.
– Magnet on transducer.
Output functions
– Position: Position in the measuring range.
– Velocity: velocity of the magnet. The sign indicates the
direction of movement. Movement from the null point
to the end point is output with a positive sign.
Movement from the end point to the null point is output
with a negative sign. Max. detectable velocity range of
−10 to +10 m/s.
– Velocity (no sign): velocity of the magnet. The
direction of movement cannot be read. Max.
detectable velocity range of 0 to 10 m/s.
Freely configurable curve
– Null and end point can be read (teach-in) or specified
with the mouse.
– For position, the distance between the null point and
end point must be at least 4 mm (0.15 inch) and
100 mm/s (4 inch/s) for velocity.
– The characteristic curve can be inverted.
– The limits can be adjusted to the measuring range.
– The error value can be set in accordance with the
limits.
Output gradient Linear
transducer
Rising BTL7-A...
BTL7-G...
BTL7-C...
BTL7-E...
Falling BTL7-A...
BTL7-G...
BTL7-C...
BTL7-E...
Tab. 6-1: Factory settings value table
www.balluff.com
Uncontrolled system movement
When starting up, if the position measuring system is
part of a closed loop system whose parameters have not
yet been set, the system may perform uncontrolled
movements. This could result in personal injury and
equipment damage.
► The system must be taken out of operation before
configuration.
► Transducers may only be connected to the
communication box for configuration.
► The communication box must be removed after
configuration.
Null point
Unit Min. value Null value
V −0.5
V −10.5 −10
mA 0
mA 3.6
V +10.5 +10
V +10.5 +10
mA 20.4 20
mA 20.4 20
Ignition protection
"nA" and "tb"
DANGER
End value Max. value
0 +10 +10.5
+10 +10.5
0 20 20.4
4 20 20.4
0 −0.5
−10 −10.5
0
4 3.6
english
End point
Error
value
+10.5
+10.5
20.4
3.6
−0.5
−10.5
0 20.4
3.6
17