Switching The System On And Off - Grace MX II Bedienungsanleitung

2.4. Switching the system on and off

To switch the Bosch system on and off, press the
main switch on the battery.
The GRACE MX II drive can also be switched on
and of from the on-board computer.
The display on the on-board computer is also
switched on with the battery.
The on-board computer shows the charge state
of the battery as well as the settings of the drive
unit.
When switching on the bike, there must not be any load on the pedals on your
GRACE MX II - otherwise, performance of the drive may be impaired. If the
GRACE MX II was switched off accidentally while there was a load on the
pedals, switch off the bike again and switch it back on without a load on the
pedals.
The drive is activated as soon as you press down on the pedals. The level of assistance
provided is based on the settings in the on-board computer. Once you stop pressing down
on the pedals while riding, or once you have reached a speed of 25 km/h or 45 km/h*, the
drive will de-activate assistance mode.
Assistance mode is re-activated automatically
once you press down onto the pedals and the
speed is less than 25 km/h/45 km/h*. To switch
off the drive system, switch off the battery using
the On/Off button or press the On/Off button on
the on-board computer. If the drive is not used
for around 10 mins, the drive will switch itself off
automatically to save energy.
* MX II S-Pedelec
96
Page |
GRACE MX II Operating instructions