1.2 USING THE CONTROL PANEL
- The arrow buttons
- When selecting a given function, any submenus available can be scrolled using the
parameter simply use the
button con rms the setting.
- In general all values that are ashing can be modi ed using the
- The "annulla" button
active alarm or error codes.
1.3 OPERATING PARAMETERS
Stove operation is determined by the Power level and Temperature parameters set by the user.
1.3.1 setting the power level
The power level de nes the amount of heat produced by the stove and consequently directly affects fuel
consumption.
a) Use the
b) The current value will ash; change it using the
c) Press
to con rm the settings.
1.3.2 Setting the temperature
Different temperature values can be set depending on the boiler's con guration:
a) Use the
b) The current value will ash; change it using the
c) Press
to con rm the settings.
read directly by a probe tted on the boiler.
storage tank.
1.3.3 Changing the ventilation
To change the value of ventilation:
a) Use the
b) The fan speed value will blink; modify the value by pressing
• "1" minimun,..., "5" maximum;
• "Auto" = automatic functioning (the stove will set automatically the fan speed and the stove power
according to the room temperature);
• "Hi" = ultrarapid functioning (to use only in the case you need to quickly heat the room);
c) press the button
20
are used to scroll between the different menus that are highlighted.
button and modify the values, again using the
goes back up one level in the menu; pressing and holding the button displays any
buttons to go to the power level menu
buttons to go to the temperature menu
buttons to go to the fan menu
to con rm the data you set.
and press
buttons
and press
buttons
: setting this value changes the desired hot water outlet temperature.
setting this value de nes the desired room temperature,
: identi es the minimum desired temperature inside the
and press
;
buttons; to set a
buttons. Pressing the
buttons.
;
;
;