MELICONI HP STETO Bedienungsanleitung Seite 15

EN
Meliconi's HP Steto 2.4 GHz digital wireless stereo headphones system uses a wireless digital audio transmission
technology to listen to a quality stereo sound from a wide range of audio player devices up to a maximum distance of 20
metres without obstacles, for complete freedom of movement. The transmitter may be connected to your TV and other
audio sources such as DVD and Blu Ray players, CD players, HiFi systems, radios, PCs or notebooks. The HP Steto
receiver headphones also feature an internal microphone activated with the MIC button, to suspend the audio from the
source device and listen to voices and surrounding sounds.
This unit uses Li-ion rechargeable batteries included. Use only the batteries supplied.
- This unit only accepts analogue electrical stereo audio signals e.g. those from standard headphone outputs, in input.
Therefore to connect it to a device with a different kind of audio output (digital – HDMI) or (optical digital – TOSLINK),
an appropriate converter/adapter will be required.
- Do not use the device outdoors or in a humid environment nor expose it to water drops or sprays.
Do not install the device in an enclosed space and ensure there is adequate ventilation.
- The AC power supply unit must be easily accessible to enable the electric separation of the device from the power
supply.
- Disconnect the transmitter base from the electrical mains supply before performing the connections.
- Do not tamper with the device – danger of electric shock. Any repair must be performed only by qualifi ed personnel.
- In the event of a fault with the AC power supply, disconnect it from the electrical socket immediately.
- Do not expose the device to excessive heat, for example direct sunlight, fi re or similar heat sources.
- Never connect a short circuit across the battery terminals.
In order to avoid possible hearing damage, do not use the headphones at high volumes for long periods
of time.
The crossed out wheelie bin symbol that appears on the device or its packaging indicates that the
product must be disposed of separately from household waste at the end of its working life. Therefore,
at the end of the device's life, you must take it to appropriate centres for the differentiated collection of
electrical and electronic waste, or return it to the retailer when purchasing a new device of equivalent
type, on a one-for-one basis. The correct differentiated collection to allow subsequent recycling of the
decommissioned device, with environmentally-compatible treatment and disposal, help to prevent any
negative effects on the environment and health and to promote the recycling of the materials of which
the device is made. Improper disposal of the product by the user will be subject to the sanctions in
Legislative Decree No. 22/1997 (article 50 and subsequent articles of Legislative Decree No. 22/1997).
IMPORTANT: Do not disassemble or throw the battery modules in a fi re. Do not dispose of batteries in
the environment. Incorrect use may harm the environment and give rise to health and safety hazards.
The wheelie bin symbol, which also appears on the battery, indicates that it must be disposed of in
accordance with the applicable regulations (CE 2006/66): fi nd out about the regulations governing the
disposal of used batteries and accumulators in your country.
HP STETO HP STETO
Thank you for purchasing a Meliconi product!
Warnings
13