Batteries; Cleaning The Device - Beurer FT 95 Gebrauchsanweisung

11. Batteries

Changing the batteries
The device requires two AAA (LR03) batteries.
• Open the battery compartment.
To do this, push the battery compartment down.
• Take the used batteries out of the battery compartment.
• Insert new batteries.
Make sure that the batteries are inserted the correct way round.
• Close the battery compartment.
Disposing of batteries
• Empty, completely flat batteries must be disposed of through specially designated collection box-
es, recycling points or electronics retailers. You are legally required to dispose of the batteries.
• The codes below are printed on batteries containing harmful substances: Pb = Battery
contains lead Cd = Battery contains cadmium Hg = Battery contains mercury

12. Cleaning the device

• The measuring sensor is the most sensitive part of the thermometer. Be very careful with
the measuring sensor when cleaning the device.
• Do not use any harsh cleaning products.
• Always observe all safety notes for users and the device.
w 3. Warnings and safety notes
Clean the measuring sensor after each use. Use a soft cloth or cotton bud that can be moistened
with disinfectant or 70% alcohol.
53