Beurer FT 95 Gebrauchsanweisung Seite 42

The year flashes on the display (Fig. 3).
• Use the MODE/MEM button to set the year, and con-
firm with the LIGHT/SET button.
The day/month flashes on the display (Fig. 4).
• Use the MODE/MEM button to set the day and month,
and confirm with the LIGHT/SET button (Fig. 5).
If the hour format is set as 12 h, the day/month display
sequence is reversed. Be sure to set the date and time
correctly. Otherwise, you will not be able to save your
measured values correctly with a date and time and
access them again later.
The hour flashes on the display (Fig. 6).
• Use the MODE/MEM button to set the hour, and con-
firm with the LIGHT/SET button.
The minute flashes on the display (Fig. 7).
• Use the MODE/MEM button to set the minute, and
confirm with the LIGHT/SET button.
In the 12 h format, the time is displayed with AM/PM.
Fig. 3
Fig. 6
42
Fig. 4
Fig. 5
Fig. 7