7.3 Cleaning the dispenser
It's important to clean the dispenser from time to time and not to leave face
wash in the dispenser for a long time without use. This is because it will dry up
and solidify. We recommend you clean the dispenser at least once a month,
especially if the device hasn't been used for some time, or won't be used
regularly.
U
Fill the dispenser with warm water and close the dispenser lid. Shake the
device and then open the dispenser lid to let the warm water and face
wash residue run out. Repeat this until the dispenser is clean.
U
When you have filled the dispenser with warm water, press the
dispensing button a few times to clean the inside of the attachment point.
U
After that, refill the dispenser with face wash .
7.4 Replacing the brush head
1.
To remove the brush head, simply grip the outer plastic base of the
brush head with one hand, and the device handle with the other, and
pull upwards until it snaps loose.
2.
To attach a brush head, place the center of the brush head on the
nipple.
3.
Gently press the brush head and push down until it clicks into
place.
13
EN