Operating Data / Hours In Operation; Select / Display / Delete; Operating Data / Litres; Operating Data / Number Of Pulses - ECOLAB Elados EDPL V60 Betriebsanleitung

10.6.2

Operating data / Hours in operation

The pump running time (number of strokes • 480 ms) since it was first commissioned or
since the last reset is displayed.

10.6.2.1 Select / Display / Delete

Fig. 10.58
10.6.3

Operating data / Litres

The metered quantity in litres since the pump was first commissioned or last reset is
displayed. On operating the pump without an oval gear meter, this value is calculated (ml /
stroke • number of metered strokes). If an oval gear meter is connected, the measured
quantity is displayed (determined from the number of oval gear meter pulses).
10.6.3.1 Select / Display / Delete
Fig. 10.59
10.6.4

Operating data / Number of pulses

The number of pulses received via the pump's pulse input (see chapter
pulse activation") since it was first commissioned or last reset is displayed.
10.6.4.1 Select / Display / Delete
Fig. 10.60
417102214_EDPL_V60.docx 104
7.2.5.2 "Installation
Rev. 1.12.11