Riding The Bike - Rocky Mountain Powerplay Bedienungsanleitung

14
Battery functionality
• The battery will function in cold weather, though at a diminished capacity. Expect
80% of full capacity at 0 °C (32 °F), and 50% of full capacity at - 10 °C (14 °F). It is
recommended to warm up a cold bike prior to use.
• If the battery reaches 65 °C (149 °F), it will shut itself down for protection until it
reaches below 60 °C (140 °F).
• For 2018 batteries, plug the battery into the charger to reset it once it has cooled.
2019+ batteries will reset automatically.
• When the remaining battery capacity is low, the Powerplay drive will progressively
reduce power output to maximize its range.
• Please note that lithium-ion batteries gradually lose capacity depending on age and
use. A dramatic decrease in capacity after recharging may be a sign that the battery
is reaching the end of its lifespan and must be replaced. Please visit your authorized
Rocky Mountain retailer for battery replacement. Under normal use, you can expect:
500Wh Battery
Will operate at 70% of full capacity
after 300 full charging cycles
(0% to 100% charge).
Transportation
Transporting and/or shipping your Powerplay Drive equipped bike may be subject to
restrictions and require special handling, labelling, and/or packaging. Be sure to inform
yourself beforehand of all legal requirements in your country.
Powerplay Owner's Manual
632Wh Battery
Will operate at 75% of full capacity
after 500 full charging cycles
(0% to 100% charge).
Powerplay Owner's Manual

Riding the bike

Warning
Make sure the brakes are applied before putting any pressure on the pedals, or even
resting your foot on the pedals. The Powerplay Drive uses a sophisticated torque
sensing circuit to deliver smooth, instant, natural feeling power. This circuit is very
sensitive, so care must be taken to not have the bike accelerate away from the rider
when stopped.
Power ON
To power up the Powerplay Drive, use the iWoc remote: click button (B).
Note: the Powerplay Drive will always power up to the lowest Power Level. The rider
can then increase the Power Level using the iWoc remote
Power levels
The Powerplay Drive provides several levels of power assistance:
Level 1: Eco
This is the lowest power setting, used for maximum battery life and rider input
Level 2: Trail
This medium assist level balances assistance and battery life for all around trail riding
Level 3: Ludicrous
For maximum speed and assistance, this level delivers a huge amount of power to the
rear wheel. Note that prolonged use of Ludicrous Mode will discharge the battery at a
relatively rapid rate
To change assist levels, use the iWoc remote: press button (C) to increase assist, or
button (A) to decrease assist.
NOTE: WITH THE HELP OF THE OPTIONAL EBIKEMOTION MOBILE APP THE RIDER
CAN CUSTOMIZE THESE POWER LEVELS. THIS IS FOUND IN THE SETTINGS MENU.
15