Expolite Tour-PAR COB 200 Bedienungsanleitung Seite 23

FanSet: the speed of the inbuilt fan can be either run in regular speed with max. brightness of the
device (Regular) or in a slower, more silent mode with reduced brightness. (Silent).
Test: gives the user the opportunity to test different functions of the LEDs step-by-step (On) or to end
the test (Off).
FacReset: resets the fixture to factory settings (Yes) or cancels this process (No).
Info-Menu
MENU
System
PERSON
Different operating data of the fixture can be monitored in the Info-Menu (System):
TimeInfo: In the submenu TimeInfo it is possible to monitor the total operating hours of the fixture
(Poweron) or the operating hours after the last switch-on of the fixture (LastRun).
Temp: In the submenu Temp the current temperature of the LED-unit (LED Temp) can be monitored.
This is shown either in degree Celsius or in degree Fahrenheit (Fahrenhe) depending on the setting
made in the submenu TempUnit.
Firmware: In the submenu Firmware the currently installed firmware version is shown.
Poweron
TimeInfo HSIC
LastRun
LEDTemp
Temp
HSIC
TempUnit
Firmware HSIC Vx.xx
E-23
xxxxh
xxxxh
xxxxC/F
Celsius
Fahrenhe