Turning The Keyboard On Or Off (Local Control); Midi Clock; Midi In Channels - Korg C-520 Bedienungsanleitung

Global settings > Turning the keyboard on or off (Local Control)

Turning the keyboard on or off (Local Control)

Local is the parameter that allows you to establish whether the
keyboard has to play the internal sounds and transmit MIDI
data at the same time (Local On), or whether it just has to
transmit MIDI data and not play the internal sound (Local
Off).
Local Off should be chosen when you wish to use the C-520 as
a mute keyboard, to play another instrument via the MIDI
OUT port. It should also be chosen when C-520 is connected
to an external sequencer via its MIDI IN and MIDI OUT con-
nectors. This will avoid the notes to be played twice, by the
keyboard and by the sequencer, producing an annoying
"echo" effect.
Normally, you will choose Local On (automatically selected
when turning the C-520 on), so that playing the keyboard will
produce sound.

MIDI Clock

MIDI Clock allows for synchronization of two MIDI devices,
for example the internal recorder of the C-520, and an external
sequencer.
Note: When the power is turned on, the MIDI Clock will be au-
tomatically set to Internal.
1.
After having kept the EDIT button pressed, use the
SCROLL button to show the MIDI Clock page:
MIDI Clock
External MIDI

MIDI IN Channels

When C-520 is controlled from an external MIDI device, it can
work as a 16-part multitimbral tone generator. You can select
a different sound on each of the 16 MIDI channels. These
channels are not accessible from the control panel, and are
separate from the Main, Layer/Left, Recorder Part 1 and Part
2, and Drum tracks. Therefore, you can continue playing with
the piano while MIDI data are received from an external MIDI
device.
Note: MIDI data is received both from the MIDI IN port, and the
USB port at the same time. For more information about MIDI
Over USB, see "What is MIDI Over USB?" on page 59.
54
12
Note: When the power is turned on, the Local will be automat-
ically set to On.
1.
After having kept the EDIT button pressed, use the
SCROLL button to show the Local Control page:
Local Control 11
On
2.
Use the +/YES and -/NO button to turn the function on or
off.
3.
Press the EXIT button to return to the Main or Song Play
page, or the SCROLL
(see below).
2.
Use the +/YES and -/NO button to choose the source of
the clock message.
Setting MIDI Clock
Internal The MIDI Clock is generated by the C-520 itself.
The message is also sent to the MIDI OUT and
USB ports.
External MIDI The MIDI Clock is received from an external
MIDI device connected to the C-520's MIDI IN
port.
External USB The MIDI Clock is received from an external
device connected to the C-520's USB port.
3.
Press the EXIT button to return to the Main or Song Play
page, or the SCROLL
(see below).
1.
After having kept the EDIT button pressed, use the
SCROLL button to show the MIDI IN Channels page:
MIDI IN Ch.
Ch:1
2.
Use the +/YES and -/NO button to choose one of the 16
available channels (Ch) to be programmed.
3.
Press the SCROLL button to move the cursor to the as-
signed track.
MIDI IN Ch.
Ch:1
button to go to the next edit page
button to go to the next edit page
13
Track 1
13
Track1