HBM TIM-EC Montageanleitung Seite 65

TIM-EC
Module configuration
The modules cannot be configured until after the
passcode is entered. Configuration of the modules is per­
formed independently for each module via the X5 Ether­
net interface. Each module must therefore be assigned
its own IP address. At the time of delivery/in individual
mode all modules are parameterized as "Master." To use
intercommunication mode, the modules must be pro­
grammed as described in Fig. 10.20 as "Super-master" or
"Slave."
Fig. 10.20 Parameterization of intercommunication in the web
server
A3704-4.0 HBM: public
Settings
63