Switching Off The Alarm Signal; Displaying The Temperature In °C / °F; Moon Phase (Model B Only); Displaying Summertime - Auriol Z30237C Bedienungs- Und Sicherheitshinweise

Operation / Troubleshooting / Cleaning and Maintenance
Switching off the alarm signal
Press any button except the SNOOZE button
to stop the alarm signal sounding. You do not
have to reactivate the alarm. It reactivates itself
automatically according to the weekly rhythm.
Note: The alarm signal switches itself off after
2 minutes.
©
Displaying the temperature
in °C / °F
The current inside temperature
the LCD.
Press the DOWN button
the Celsius and Fahrenheit temperature scales

Moon phase (Model B only)

The LCD radio-controlled wall clock shows the current
moon phase in the LC display (Model B only).
8
It uses the following symbols:
Full moon Waning Last quarter
gibbous
New moon Waxing First quarter
crescent
©

Displaying summertime

Summertime is automatically indicated on the LCD
by the summertime icon
the information as to whether it is summertime or not
from the DCF radio signal.
Note: Reception of the radio signal may be seriously
disrupted in reinforced concrete buildings.
10 GB/CY
20
Note: Press and keep pressed the DOWN button
for about 2 seconds to deactivate the time zone
is indicated on function.
7
©
to switch between
22
.
7
Waning ©
crescent
½
Waxing
gibbous
. The clock receives
4

Setting the time zone

Press and keep pressed the DOWN button
about 2 seconds. The time zone symbol
is displayed.
Press and keep pressed the SET button
about 3 seconds. The hour display flashes.
Press the UP or DOWN button
23
the desired hour value.
Press the SET button to confirm your setting.
25

Troubleshooting

This appliance has delicate electronic compo-
nents. This means that if it is placed near an
object that transmits radio signals, it could cause
interference. This could be, for example, mobile
telephones, walkie talkies, CB radios, remote
controls and microwaves. If the display indicates
a problem, move such objects away from it.
Electrostatic discharges may cause malfunctions.
In the event of such malfunctions, remove the
batteries briefly and reinsert them.

Cleaning and Maintenance

Under no circumstances should you use liquids
or detergents, as these will damage the device.
The device should only be cleaned on the out-
side with a soft dry cloth.
for
22
5
for
25
to set
22
22