Hydromassage Menu; Lighting System Menu - Jacuzzi J-470 Montageanweisung Und Bedienung Und Wartung

Hydromassage menu

From main menu (see chap.. concerned) press key B to display
the menu relative to the hydromassage:
1
A
Jet 1
Jet 2
Jet 3
B
3
Note: Once you enter the Jets Pump Submenu, all the pumps
will activate. You can turn off all or individual jets pump by pres-
sing the Splash button or the button next to the jets pump.
press the key located alongside this symbol to activa-
te/deactivate pump 1.
press the key located alongside this symbol to activa-
te/deactivate pump 2 (if applicable)
3
press the key located alongside this symbol to activa-
te/deactivate pump 3 (if applicable)
Note: when the pump is active the icon will have the following
configuration:
Each time the pump is manually accessed it will be deactiva-
ted automatically after approximately 20 minutes.

Lighting system menu

From main menu (see chap.. concerned) press key C to display
the menu relative to the lighting system:
A
B
press the key located alongside this symbol to activa-
te/deactivate the fixed lighting.
press the key located alongside this symbol to activa-
te/deactivate the colour cycle.
not available.
2
JETS
C
D
Press to
turn All Off
INTERIOR
C
Brightness
D
COLOR
Fixed lighting
I
After having pressed key A, use the zone to the left of the
circular keypad to select the colour in the order: blue-pale
blue-green-yellow-orange-red-violet-blue; press the zone to
the right of the circular keypad to select the colour in the
opposite order.
I
The intensity of the light can be varied as follows:
- press the upper zone of the circular keypad to increase
intensity.
- press the lower part of the circular keypad to decrease
intensity.
Colour cycles
I
After having pressed the C key use the zone on the right
of the circular keypad to increase the speed of the variations
in colour; press the zone on the left of the circular keypad
to decrease the speed in the variation of the colours.
A number (from 1 to 6) will appear on the display indicating the time
between one variation and another (1= 60 seconds; 6= 3 seconds).
I
To vary the lighting intensity please refer to the information
provided concerning the fixed light mode.
Selecting desired massage action
B C
A
Each model incorporates a massage selector that allows you
to customize the massage and performance by diverting water
between various jet systems.
I S
imply turn massage selector to position A (Combo), B, or C
to divert water pressure to various jet groups.
N.B.: The valve is designed to operate in positions A (Combo),
B, and C for optimum performance. For optimum filtration ben-
efits, leave the valve in position A when spa is covered. Select
position B or C for maximum jet performance during spa use.
Indicator Light
The indicator light located on the front cabinet panel of the spa
is an early detection system that will notify you when the spa
needs immediate attention. A solid white light indicates that all
operations are normal. A solid red light indicates that immedi-
ate attention is required to clear or fix an error code.
65