Cleaning And Care - Klarstein 10033088 Handbuch

EN
16
Pre-brew function
Freshly roasted coffee has more CO2 in the bean. If you want to cook with freshly
roasted coffee or pre-brew the coffee, press and hold the On/Off switch for 5 seconds.
The red LED flashes and indicates that you have activated the pre-brewing function.
Press the power button again to start brewing. You can deactivate the pre-brewing
function at any time by pressing the on/off switch until the red LED flashes.

CLEANING AND CARE

• Clean the unit after each use.
• Always unplug the power cord before cleaning.
• Never immerse the housing in water or other liquids.
• Disconnect the coffee machine from the power supply and allow it to cool
completely before cleaning.
• Clean the housing surface with a soft, damp cloth.
• Do not clean the hot plate with abrasive cleaner or steel wool.
• Descale the machine every two months with a commercially available descaler or
a water-vinegar mixture. Fill the water tank with the mixture and let the mixture run
through the machine once. Fill the tank with fresh, clean water up to the MAX mark
and let the water run through as well.
• Clean the glass carafe and funnel with water and dry both parts carefully.
• Remove the spray arm and clean it as well.