Initial Operation - Klarstein 10033088 Handbuch

EN
14
OPERATION
Before the first operation
• Remove all packaging materials, labels and stickers from the coffee machine.
• Clean the unit by filling the water tank with clear, cold water to the MAX mark.
Switch on the coffee machine and let the water run through.
• Allow the unit to cool for 5 minutes before repeating the procedure. Run water at
least 2 times before boiling coffee.

Initial operation

1. Take the decanter out of the coffee machine, open the lid of the water tank and fill
in the desired amount of cold water. Do not fill more than 8 cups (150 ml per cup).
2. Place a type 4 V filter in the filter basket and add ground coffee to the filter. We
recommend 6-9 grams of ground coffee per cup (about 1 level spoon of coffee per
cup). Place the cover on the filter basket.
Note: Make sure that the switch
on the filter basket is in the OPEN
position so that the coffee does
not overflow when brewing.
3. Put on the water tank cover. Slide the filter basket into the holder and place the
glass decanter on the hot plate.
4. Plug the plug into the power outlet and press the On/Off switch (see Fig. 4). The
red LED lights up and indicates that the coffee is being brewed. Do not remove the
glass carafe during the brewing process. If you need to remove the decanter, turn
the machine off and set the switch on the filter basket to CLOSE so that the coffee
does not continue to run. Replace the glass decanter, set the switch to OPEN and
press the On/Off switch to continue brewing.
OPEN CLOSE