Nice TT6 Gebrauchsanleitungen Seite 11

Response
Start TT ADR TT ENDPOINT
[XX] [YY]
RISP 01 04
5.5.6 – Move a little step up
Sends an "up" command that it make the smallest move-
ment that the motor can do. Use to set the right position
before setting the limits switch or the partial positions.
Caution: the up and down directions are correctly
assigned after setting the relevant limit switches.
Structure
Start TT ADR TT ENDPOINT
[XX] [YY]
CMD IND 04
The data field is empty.
Example
Start TT ADR TT ENDPOINT
[XX] [YY]
CMD 01 04
Response
Start TT ADR TT ENDPOINT
[XX] [YY]
RISP 01 04
Command Data CR
[AA]
13 – –
Command Data CR
[AA]
12 – –
Command Data CR
[AA]
12 – –
Command Data CR
[AA]
12 – –
5.5.7 – Memorise partial position 1, 2, 3, 4, 5, 6
and limit switch 0 and 1 positions
Assigns the current position to a variable position.
Structure
Start TT ADR TT ENDPOINT
[XX] [YY]
CMD IND 04
The data field is empty.
Example
Start TT ADR TT ENDPOINT
[XX] [YY]
CMD 01 04
Response
Start TT ADR TT ENDPOINT
[XX] [YY]
RISP 01 04
5.5.8 – Delete partial position 1, 2, 3, 4, 5, 6 and
limit switch 0 and 1 positions
Deletes the entered position.
Structure
Start TT ADR TT ENDPOINT
[XX] [YY]
CMD IND 04
The data field is empty.
Command Data CR
[AA]
– – –
Command Data CR
[AA]
20 – –
Command Data CR
[AA]
20 – –
Command Data CR
[AA]
– – –
English - 9