Fuel Feeding - TOHATSU MD 40B2 Benutzerhandbuch

ENOM00044-B

2. Fuel feeding

ENOW00029-A
WARNING
When opening fuel tank cap, be sure to fol-
low the procedure described below. Fuel
could blast out through the fuel tank cap in
case the cap is loosened by using another
procedure when internal pressure of fuel
tank is raised by heat from sources such as
sun light.
ENOW00947-0
CAUTION
When using a separate tank, be sure that
the fuel line is not kinked and is connected
securely.
1. Full open the air vent screw on the fuel
tank cap.
1. Air vent screw
2. Fuel tank cap
2. Connect the fuel connector to the
engine and fuel tank.
1. Fuel connector
2. Pull
3. Insert
1. Pull
2. Insert
1
3. Squeeze primer bulb until it becomes
2
ENOF00027-A
1. Engine side
2. Fuel tank side
Do not squeeze primer bulb with engine
running or when the outboard motor is
tilted up. Otherwise, fuel could overflow.
ENGINE OPERATION
2 2 2
2
1
stiff to feed fuel to vapor separator.
Direct arrow mark upward when prim-
ing.
1
2
45
3 3
1
ENOF01316-0
ENOF00861-A
ENOF00862-0
7